Tango's Ultimate Hot Rod House

Members Login
Post Info TOPIC: Camshaft Upgrade

Senior Member

Status: Offline
Posts: 316
Camshaft Upgrade

Got some down time thinking tearing engine out Nova step cam up. 350 with comp xe268 with roller tip rockers. Older Holley dual plane intake with 750 vc on top. Fordge flat top pistons .030 over. Dart Iron Heads 180cc. Any thoughts. Just want get little more out of it. Car ran 13.42 in 1/4 spinning tires off line with open headers. Automatic 373 gears. Like be at 12.50 in 1/4.

Drive it like you stole it'


Status: Offline
Posts: 1425

the XE268 is a good cam.i had one in a older motor i had. ran real good. maybe a XE274 if you want to go a step bigger. or maybe somthing in the magnum series like the H280 ??


SB Chevy Tech

Status: Offline
Posts: 98

I like the Lunati Voodoo series cams. In an engine such as yours I'd put a 276 in it.

Hydraulic. Hot Street cam, likes 2800 converter, Hi-Rise type dual plane intake with 750cfm carb, headers, 10:1 compression and 3.73 gears. Likes up to 200HP nitrous.

•Advertised Duration (Int/Exh): 276/284
•Duration @ .050 (Int/Exh): 233/241
•Gross Valve Lift (Int/Exh): .504/.525
•LSA/ICL: 110/106
•Valve Lash (Int/Exh): Hyd/Hyd
•RPM Range: 2200-6400
Part Number: 10120704LK

'68 Camaro Twin Turbo
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard