Tango's Ultimate Hot Rod House

Members Login
Post Info TOPIC: Forged Pontiac Cranks and Stroker Kits

Senior Member

Status: Offline
Posts: 332
Forged Pontiac Cranks and Stroker Kits

The new Pontiac competition stroker kit from Eagle Specialty Products. Offered for both the 400 and 455ci Poncho variants, there are three stroke options. They are 4.25", 4.35", and 4.50". These cranks are no nodular iron jobs, they're made from 4303 forged steel.

The cranks are available on their own or in a complete stroker kit that ships with 6.8" H-beam Eagle rods, Mahle flat top pistons (with rings) and Clevite bearings. Combining this stroker kit with some of the more recently available aftermarket high performance Pontiac cylinder heads would make for a romping, stomping, big block Chevy eating machine. The whole stroker kit has an MSRP of $2093.75.

It should be mentioned that the cranks are created using a non-twist style forging, are heat treated, shot peened, and nitrided to increase strength. The journals are all micropolished and a .125" fillet is used on every journal. because of that fillet narrowed or chamfered bearings must be used. Eagle says that these cranks are good for motors making up to 1500hp.

Eagle Specialty Products Pontiac Stroker Kit

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard