Tango's Ultimate Hot Rod House

Members Login
Post Info TOPIC: looking for cam


Mod

Status: Offline
Posts: 1349
Date:
looking for cam


hey guys looking for a cam for a sbc.in the L69 spec range.

i am trying to get a lightly used one as my buget is tight right now.

let me know what you have.

 

thanks



__________________


Administrator

Status: Offline
Posts: 8468
Date:

I have a brand new take out from a dished 350 I bought . It's a hyd Flat tappet kinda close to the spec of that SS Monte 305 camshaft . I checked it at about 422" Lift on both sides . If your really going to use it for you . I will send it free of charge . I was thinking it would be a great camshaft for a one step over stock from the G.M 390" 410" camshaft . I did run a camshaft I would say could be the same cam 420" in a stock 350 with 882 Heads that I swapped into a 1977 Impala I had . It idled Like stock but torqued nice right off the Light even with the stock Cat Exhaust and did MPG well in town for the Large car it was . So in a 305 that same camshaft would be will to add some Horse power and torque .

__________________

I cannot think to leave you now . For that alone I still fight on .



Mod

Status: Offline
Posts: 1349
Date:

yeah that would be great!!!!!
i was gonna use the cam i took out of my 400sbc. but when i checked out the specs its the same peanut cam as all the other sbc of the times.
but yeah that 420 lift cam would be great for my build. do you by any chance have the lifters as well?

__________________


Administrator

Status: Offline
Posts: 8468
Date:

I have no Lifters for it . But you will be ok with plain USA no name hyd Lifters from most parts houses . And your stock springs will be ok as well . Just P.M Me with the ship to info when you want this camshaft .

__________________

I cannot think to leave you now . For that alone I still fight on .



Administrator

Status: Offline
Posts: 8468
Date:

Heres your Camshaft . Still Looking for right box / tube to pack it in . It measures out at 283-284 gross Valve Lift so you go 284 x 1.50 Rocker ratio = 425" Lift .

 

 



__________________

I cannot think to leave you now . For that alone I still fight on .

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard